Cart

Member

ANJWJTFL-MHSSV TANOI TF Fluteless Tap Long M TFLSold0pcsThe HSSV TANOI TF Fluteless Tap Long M TFL is TANOI's long-thread forming tap - no cutting, no chips; the thread is formed by pushing the material into shape. Forming length and size band separate it from the short-thread TFS: a longer forming section gives greater thread engagement, which suits joints needing more clamping strength. Substrate HSSV high-vanadium steel rated to HRC30. Forming needs a ductile material - brittle materials such as cast iron are unsuitable - and the pilot hole tolerance is tighter than for a cutting tap; for small threads or thin parts choose the TANOI forming tap, short thread type TFS; for the Taiwan-made equivalent choose the nitrided forming tap FMT; for brittle materials such as cast iron use the TANOI standard spiral flute tap SP. Substrate HSSV high-vanadium high-speed steel, uncoated, rated to HRC30. It cuts metric M threads, in sizes covering nominal size 2~10mm, pitch 0.4~1.5, 11 variants. Made in Japan. Are formed threads stronger? Yes - the grain flows around the thread form instead of being cut through, and cold working adds to it, so tensile strength is usually higher. What pilot size? Use a forming-tap pilot table, not cutting-tap figures. Typical applications: chipless tapping of aluminium alloys and low-carbon steel, threads needing clamping strength, and lines standardised on Japanese tooling.

Product Categories

Cutting Tools Tap Forming Tap / Roll Tap (Chipless)

HSSV TANOI TF Fluteless Tap Long M TFL

The HSSV TANOI TF Fluteless Tap Long M TFL is TANOI's long-thread forming tap - no cutting, no chips; the thread is formed by pushing the material into shape.

Specifications (11 items)

Part No.	Standard	Dia.	Pitch	Flute L.	OAL	Shank Dia.
ANJWJTFL-M2.0x0.4	Metric M	2	0.4	15	40	3
ANJWJTFL-M2.5x0.45	Metric M	2.5	0.45	16	44	3
ANJWJTFL-M2.6x0.45	Metric M	2.6	0.45	16	44	3
ANJWJTFL-M3.0x0.5	Metric M	3	0.5	18	46	4
ANJWJTFL-M3.5x0.6	Metric M	3.5	0.6	18	48	4
ANJWJTFL-M4.0x0.7	Metric M	4	0.7	20	52	5
ANJWJTFL-M5.0x0.8	Metric M	5	0.8	22	60	5.5
ANJWJTFL-M6.0x1	Metric M	6	1	24	62	6
ANJWJTFL-M8.0x1.25	Metric M	8	1.25	30	70	6.2
ANJWJTFL-M10x1.25	Metric M	10	1.25	32	75	7
ANJWJTFL-M10x1.5	Metric M	10	1.5	32	75	7

Specification Range

Diameter	2~10mm
Pitch	0.4~1.5
Flute length	15~32mm
Overall length	40~75mm
Shank diameter	3~7mm

Product Description

The HSSV TANOI TF Fluteless Tap Long M TFL is TANOI's long-thread forming tap - no cutting, no chips; the thread is formed by pushing the material into shape. Forming length and size band separate it from the short-thread TFS: a longer forming section gives greater thread engagement, which suits joints needing more clamping strength. Substrate HSSV high-vanadium steel rated to HRC30. Forming needs a ductile material - brittle materials such as cast iron are unsuitable - and the pilot hole tolerance is tighter than for a cutting tap; for small threads or thin parts choose the TANOI forming tap, short thread type TFS; for the Taiwan-made equivalent choose the nitrided forming tap FMT; for brittle materials such as cast iron use the TANOI standard spiral flute tap SP. Substrate HSSV high-vanadium high-speed steel, uncoated, rated to HRC30. It cuts metric M threads, in sizes covering nominal size 2~10mm, pitch 0.4~1.5, 11 variants. Made in Japan. Are formed threads stronger? Yes - the grain flows around the thread form instead of being cut through, and cold working adds to it, so tensile strength is usually higher. What pilot size? Use a forming-tap pilot table, not cutting-tap figures. Typical applications: chipless tapping of aluminium alloys and low-carbon steel, threads needing clamping strength, and lines standardised on Japanese tooling.

Workpiece Materials & Hardness

Steel (P)
Stainless steel (M)
Non-ferrous metals (N)

Max. workpiece hardness HRC30

Related Resources

Can't find the size you need? Use the spec quick filter to search by category.