Cart

Member

ANJWJTFS-MHSSV TANOI TF Fluteless Tap Short M TFSSold0pcsThe HSSV TANOI TF Fluteless Tap Short M TFS is TANOI's short-thread forming tap - also chipless - with a shorter forming section and a smaller thread range. Forming length and size band separate it from the long-thread TFL: shorter engagement means lower torque, so small threads and thin parts are less likely to twist the tap off. Substrate HSSV high-vanadium steel rated to HRC30. Forming needs a ductile material - brittle materials such as cast iron are unsuitable; for greater clamping strength choose the TANOI forming tap, long thread type TFL; for the Taiwan-made equivalent choose the nitrided forming tap FMT; for brittle materials such as cast iron use the TANOI standard spiral point tap GN. Substrate HSSV high-vanadium high-speed steel, uncoated, rated to HRC30. It cuts metric M threads, in sizes covering nominal size 1.4~6mm, pitch 0.3~1, 9 variants. Made in Japan. Why use the short type on thin parts? A thin part has no depth for a long thread anyway, so the long type only adds torque without benefit. What pilot size? Use a forming-tap pilot table, not cutting-tap figures. Typical applications: chipless tapping of thin parts and small threads, precision component work, and lines standardised on Japanese tooling.

Product Categories

Cutting Tools Tap Forming Tap / Roll Tap (Chipless)

HSSV TANOI TF Fluteless Tap Short M TFS

The HSSV TANOI TF Fluteless Tap Short M TFS is TANOI's short-thread forming tap - also chipless - with a shorter forming section and a smaller thread range.

Specifications (9 items)

Part No.	Standard	Dia.	Pitch	Flute L.	OAL	Shank Dia.
ANJWJTFS-M1.4x0.3	Metric M	1.4	0.3	7	34	3
ANJWJTFS-M1.7x0.35	Metric M	1.7	0.35	8	36	3
ANJWJTFS-M2.0x0.4	Metric M	2	0.4	9	40	3
ANJWJTFS-M2.5x0.45	Metric M	2.5	0.45	10	44	3
ANJWJTFS-M2.6x0.45	Metric M	2.6	0.45	10	44	3
ANJWJTFS-M3.0x0.5	Metric M	3	0.5	10	46	4
ANJWJTFS-M4.0x0.7	Metric M	4	0.7	10	52	5
ANJWJTFS-M5.0x0.8	Metric M	5	0.8	10	60	5.5
ANJWJTFS-M6.0x1	Metric M	6	1	10	62	6

Specification Range

Diameter	1.4~6mm
Pitch	0.3~1
Flute length	7~10mm
Overall length	34~62mm
Shank diameter	3~6mm

Product Description

The HSSV TANOI TF Fluteless Tap Short M TFS is TANOI's short-thread forming tap - also chipless - with a shorter forming section and a smaller thread range. Forming length and size band separate it from the long-thread TFL: shorter engagement means lower torque, so small threads and thin parts are less likely to twist the tap off. Substrate HSSV high-vanadium steel rated to HRC30. Forming needs a ductile material - brittle materials such as cast iron are unsuitable; for greater clamping strength choose the TANOI forming tap, long thread type TFL; for the Taiwan-made equivalent choose the nitrided forming tap FMT; for brittle materials such as cast iron use the TANOI standard spiral point tap GN. Substrate HSSV high-vanadium high-speed steel, uncoated, rated to HRC30. It cuts metric M threads, in sizes covering nominal size 1.4~6mm, pitch 0.3~1, 9 variants. Made in Japan. Why use the short type on thin parts? A thin part has no depth for a long thread anyway, so the long type only adds torque without benefit. What pilot size? Use a forming-tap pilot table, not cutting-tap figures. Typical applications: chipless tapping of thin parts and small threads, precision component work, and lines standardised on Japanese tooling.

Workpiece Materials & Hardness

Steel (P)
Stainless steel (M)
Non-ferrous metals (N)

Max. workpiece hardness HRC30

Related Resources

Can't find the size you need? Use the spec quick filter to search by category.