ANCCD5IPFInsert Spiral Point Tap UNF 5IPFSold0pcsThe UNF 5IPF is a French-brand insert tap made of HSS-EX, ideal for use with wire thread inserts (helical coils), commonly for reinforcing aluminium parts or repairing stripped threads. Available in 10 sizes (thread dia 1~5, pitch 20~32, overall length 62~95mm, shank dia 4.5~12mm). A TiN coating adds a hard golden film for better wear and anti-galling, extending tool life. Suitable for machining non-ferrous metals like aluminium and copper, workpiece hardness up to HRC30. French brand, consistent quality.
Product Categories
Tags
Thread Insert Tap
Product Overview: HSS Thread Insert Tap Spiral Point UNF – 5IPF Series
【Product Features & Why We Recommend It】
- French Brand Professional Quality: Originating from a professional French cutting tool brand with rigorous quality control — recommended for users with high demands on UNF fine thread insert installation hole through-hole tapping accuracy in aluminum alloys, copper, and other non-ferrous metals.
- UNF Fine Thread Insert Tap Spiral Point Through-Hole Dedicated Design: Features a spiral point thread insert tap geometry that pushes chips forward and out of the hole — recommended for through-hole tapping of UNF fine thread insert (Heli-Coil / Wire Thread Insert) installation holes in non-ferrous metals, providing higher tapping efficiency in through-hole applications compared to the spiral flute version (5ISF), where the thread insert tap diameter specification is larger than standard taps to ensure the effective UNF fine thread size after insert installation meets North American standard requirements.
- HSS-EX Ultra-High Performance Substrate: Manufactured with HSS-EX ultra-high performance high-speed steel, delivering superior hardness, toughness, and wear resistance compared to standard HSS and HSS-CO — recommended for long-duration stable spiral point through-hole tapping of UNF fine thread insert holes in aluminum alloys, copper, and other non-ferrous metals.
- TiN Coating Enhancement: The surface is treated with TiN coating, providing good wear resistance — combined with the spiral point design to effectively suppress built-up edge adhesion during non-ferrous metal machining, recommended for continuous UNF fine thread insert hole spiral point tapping of aluminum alloys and copper materials to extend tool service life.
- 10 UNF Specification Precise Coverage: Available in thread diameter 1–5 inches and pitch 20–32 TPI across 10 specifications — recommended as the dedicated high-performance stock tool for non-ferrous metal UNF fine thread insert hole spiral point through-hole tapping, covering common North American fine thread specification aluminum alloy structural component thread insert installation hole requirements.
【Machining Applications & Uses】
- Primary Use: Aluminum alloy and copper UNF fine thread insert installation hole spiral point through-hole tapping, non-ferrous metal UNF thread repair insert hole forming, and NC machining center non-ferrous metal UNF fine thread insert hole automatic tapping.
- Recommended Work Materials:
- N-Class (Non-Ferrous Metals): Aluminum alloys (6061, 7075, 5-series aluminum), pure copper, brass, and other non-ferrous metals — the sole dedicated recommended application scenario for this series, where the UNF fine thread insert spiral point geometry combined with HSS-EX substrate and TiN coating effectively addresses the long chip management, built-up edge, and adhesion challenges during non-ferrous metal UNF thread insert hole through-hole tapping, recommended for use with appropriate cutting fluid to ensure UNF fine thread insert installation hole quality.
