Solid Carbide Barrel End Mill Head X-KB
DHF Solid Carbide Barrel End Mill Head X-KB, commonly called a barrel cutter, forms and finishes 3D surfaces. This is a replaceable head: it screws onto an arbor with an M7-3P thread and requires a separate arbor and the K10 spanner.
- Corner radius 2 ~ 3
- Taper 20°
- Flutes 4
- Material Carbide SMG0.4
- Coating G18
- Max. hardness HRC60
Specifications (4 items)
| Part No. | Corner radius | Taper / included angle | Flute length | Overall length | Flutes |
|---|---|---|---|---|---|
| AVTDHX-KB10R2R030 | 2 | 20° | 12.3 | 18.1 | 4 |
| AVTDHX-KB10R2R050 | 2 | 20° | 12.5 | 18.1 | 4 |
| AVTDHX-KB10R3R100 | 3 | 20° | 10.7 | 18.1 | 4 |
| AVTDHX-KB10R3R250 | 3 | 20° | 10.8 | 18.1 | 4 |
Size range
| Taper / included angle | 20° |
|---|---|
| Corner radius | 2 ~ 3 |
| Flute length | 10.7 ~ 12.5 |
| Overall length | 18.1 |
Product description
DHF Solid Carbide Barrel End Mill Head X-KB, commonly called a barrel cutter, forms and finishes 3D surfaces. This is a replaceable head: it screws onto an arbor with an M7-3P thread and requires a separate arbor and the K10 spanner. Sister series include KB (one-piece barrel end mill, 89mm overall). It is built on a sub-micron SMG0.4 substrate with a G18 coating, rated to HRC60. It covers taper 20°, flute length 10.7~12.5mm, overall length 18.1mm, neck diameter 10mm, 4 flutes, in 4 sizes, made in Taiwan. It machines titanium and other superalloys. Why a replaceable head? Only the head is replaced when the edge wears; the arbor is reused. Typical uses: mould cavity finishing, electrode and fixture contouring.
Workpiece materials & hardness
- S – Heat-resistant alloys
Max. workpiece hardness HRC60 · Through coolant No
Tags
- Barrel