Solid Carbide Corner Radius End Mill RTB
DHF Solid Carbide Corner Radius End Mill RTB, commonly called a bull nose or corner radius cutter, carries a corner radius so it can rough and clean floors in one tool.
Specifications (19 items)
| Part No. | Dia. | Corner radius | Flute length | Overall length | Shank dia. | Flutes |
|---|---|---|---|---|---|---|
| AVRDHRTB0305 | 3 | 0.5 | 8 | 50 | 3 | 4 |
| AVRDHRTB0405 | 4 | 0.5 | 10 | 50 | 4 | 4 |
| AVRDHRTB0505 | 5 | 0.5 | 13 | 50 | 6 | 4 |
| AVRDHRTB0510 | 5 | 1 | 13 | 50 | 6 | 4 |
| AVRDHRTB0605 | 6 | 0.5 | 16 | 50 | 6 | 4 |
| AVRDHRTB0610 | 6 | 1 | 16 | 50 | 6 | 4 |
| AVRDHRTB0805 | 8 | 0.5 | 20 | 60 | 8 | 4 |
| AVRDHRTB0810 | 8 | 1 | 20 | 60 | 8 | 4 |
| AVRDHRTB1005Z | 10 | 0.5 | 25 | 75 | 10 | 4 |
| AVRDHRTB1005 | 10 | 0.5 | 30 | 75 | 10 | 4 |
| AVRDHRTB1010Z | 10 | 1 | 25 | 75 | 10 | 4 |
| AVRDHRTB1010 | 10 | 1 | 30 | 75 | 10 | 4 |
| AVRDHRTB1020Z | 10 | 2 | 25 | 75 | 10 | 4 |
| AVRDHRTB1020 | 10 | 2 | 30 | 75 | 10 | 4 |
| AVRDHRTB1030Z | 10 | 3 | 25 | 75 | 10 | 4 |
| AVRDHRTB1030 | 10 | 3 | 30 | 75 | 10 | 4 |
| AVRDHRTB1210 | 12 | 1 | 30 | 75 | 12 | 4 |
| AVRDHRTB1220 | 12 | 2 | 30 | 75 | 12 | 4 |
| AVRDHRTB1230 | 12 | 3 | 30 | 75 | 12 | 4 |
Specification Range
| Diameter | 3~12mm |
|---|---|
| Corner radius | 0.5~3mm |
| Flute length | 8~30mm |
| Overall length | 50~75mm |
| Shank diameter | 3~12mm |
Product Description
DHF Solid Carbide Corner Radius End Mill RTB, commonly called a bull nose or corner radius cutter, carries a corner radius so it can rough and clean floors in one tool. Sister series include RTG (sub-micron SMG0.4 substrate), UGR (rated to HRC65), RTD (ultra-fine MG0.6 substrate). What sets this one apart is a sub-micron SMG0.6 substrate with a G10 coating, rated to HRC55. It covers diameter 3~12mm, corner radius 0.5~3mm, flute length 8~30mm, overall length 50~75mm, 4 flutes, in 19 sizes, made in Taiwan. It machines stainless steel, titanium and other superalloys. What is the smallest diameter? 3mm. Can it cut hardened steel? Not recommended; choose a high-hardness series instead. Typical uses: mould roughing, floor clean-up and wall profiling, continuous milling where edge life matters.
Workpiece Materials & Hardness
- Stainless steel (M)
- Heat-resistant superalloys (S)
Max. workpiece hardness HRC55
Related Resources
Can't find the size you need? Use the spec quick filter to search by category.