Cart

Member

AYCNAAQDEXZSolid Carbide Flat Bottom Drill 9610 AQDEXZSold0pcsNACHI 9610 AQDEXZ is a solid carbide flat-bottom drill that leaves a flat hole bottom. It is the only carbide drill in this catalogue - everything else is high speed steel; the flat geometry lets it start on inclined and curved faces without walking. It is made from solid carbide with an AQ coating for wear resistance and built-up edge control. Sizes cover diameter 0.2~20mm, flute length 0.66~90mm, overall length 47~145mm, shank diameter 3~20mm, 175 in total, made in Japan. Why can it start on a slope? The flat point brings both cutting edges into contact at once, so it does not slide toward the low side as a pointed drill would. It suits carbon and alloy steel, stainless steel, cast iron with workpiece hardness up to HRC50. Typical uses: drilling on inclined and curved surfaces, flat-bottomed counterbores, cross holes and thin walls. There is no second carbide drill in this family - everything else here is high speed steel; where HRC45 is enough and HSS toughness is preferred, the SG series 7572P SGESS and 7574 SGESR are both rated to HRC45. This one's HRC50 is the highest in the catalogue.

Product Categories

Cutting Tools Drill End Mill Shank Drill

Solid Carbide Flat Bottom Drill 9610 AQDEXZ

NACHI 9610 AQDEXZ is a solid carbide flat-bottom drill that leaves a flat hole bottom.

Specifications (175 items)

Dia.

Flute length

Overall length

Shank dia.

Depth ratio (×D)

0.2~1.9

0.66~6.2

3.18~3.31

Expand this group (26 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ0020	0.2	0.66	47	3
AYCNAAQDEXZ0025	0.25	0.82	47	3
AYCNAAQDEXZ0030	0.3	0.99	47	3
AYCNAAQDEXZ0035	0.35	1.16	47	3
AYCNAAQDEXZ0040	0.4	1.32	47	3
AYCNAAQDEXZ0045	0.45	1.48	47	3
AYCNAAQDEXZ0050	0.5	1.65	47	3
AYCNAAQDEXZ0055	0.55	1.81	47	3
AYCNAAQDEXZ0060	0.6	1.98	47	3
AYCNAAQDEXZ0065	0.65	2.14	47	3
AYCNAAQDEXZ0070	0.7	2.31	47	3
AYCNAAQDEXZ0075	0.75	2.47	47	3
AYCNAAQDEXZ0080	0.8	2.64	47	3
AYCNAAQDEXZ0085	0.85	2.8	47	3
AYCNAAQDEXZ0090	0.9	2.97	47	3
AYCNAAQDEXZ0095	0.95	3.13	47	3
AYCNAAQDEXZ0100	1	3.3	47	3
AYCNAAQDEXZ0110	1.1	3.5	47	3
AYCNAAQDEXZ0120	1.2	3.9	47	3
AYCNAAQDEXZ0130	1.3	4.2	47	3
AYCNAAQDEXZ0140	1.4	4.6	47	3
AYCNAAQDEXZ0150	1.5	4.9	47	3
AYCNAAQDEXZ0160	1.6	5.2	47	3
AYCNAAQDEXZ0170	1.7	5.5	47	3
AYCNAAQDEXZ0180	1.8	5.8	47	3
AYCNAAQDEXZ0190	1.9	6.2	47	3

2~3.9

9~18

4~6

4.44~5.24

Expand this group (20 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ0200	2	9	50	4
AYCNAAQDEXZ0210	2.1	11	50	4
AYCNAAQDEXZ0220	2.2	11	50	4
AYCNAAQDEXZ0230	2.3	11	50	4
AYCNAAQDEXZ0240	2.4	12	50	4
AYCNAAQDEXZ0250	2.5	12	50	4
AYCNAAQDEXZ0260	2.6	12	50	4
AYCNAAQDEXZ0270	2.7	14	50	4
AYCNAAQDEXZ0280	2.8	14	50	4
AYCNAAQDEXZ0290	2.9	14	50	4
AYCNAAQDEXZ0300	3	14	50	6
AYCNAAQDEXZ0310	3.1	15	50	6
AYCNAAQDEXZ0320	3.2	15	50	6
AYCNAAQDEXZ0330	3.3	15	50	6
AYCNAAQDEXZ0340	3.4	16	50	6
AYCNAAQDEXZ0350	3.5	16	50	6
AYCNAAQDEXZ0360	3.6	16	50	6
AYCNAAQDEXZ0370	3.7	18	50	6
AYCNAAQDEXZ0380	3.8	18	50	6
AYCNAAQDEXZ0390	3.9	18	50	6

4~5.9

18~27

50~60

4.42~4.81

Expand this group (20 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ0400	4	18	50	6
AYCNAAQDEXZ0410	4.1	19	60	6
AYCNAAQDEXZ0420	4.2	19	60	6
AYCNAAQDEXZ0430	4.3	19	60	6
AYCNAAQDEXZ0440	4.4	21	60	6
AYCNAAQDEXZ0450	4.5	21	60	6
AYCNAAQDEXZ0460	4.6	21	60	6
AYCNAAQDEXZ0470	4.7	22	60	6
AYCNAAQDEXZ0480	4.8	22	60	6
AYCNAAQDEXZ0490	4.9	22	60	6
AYCNAAQDEXZ0500	5	23	60	6
AYCNAAQDEXZ0510	5.1	24	60	6
AYCNAAQDEXZ0520	5.2	24	60	6
AYCNAAQDEXZ0530	5.3	24	60	6
AYCNAAQDEXZ0540	5.4	26	60	6
AYCNAAQDEXZ0550	5.5	26	60	6
AYCNAAQDEXZ0560	5.6	26	60	6
AYCNAAQDEXZ0570	5.7	27	60	6
AYCNAAQDEXZ0580	5.8	27	60	6
AYCNAAQDEXZ0590	5.9	27	60	6

6~7.9

27~36

60~70

4.34~4.69

Expand this group (20 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ0600	6	27	60	6
AYCNAAQDEXZ0610	6.1	28	70	6
AYCNAAQDEXZ0620	6.2	28	70	6
AYCNAAQDEXZ0630	6.3	28	70	6
AYCNAAQDEXZ0640	6.4	30	70	6
AYCNAAQDEXZ0650	6.5	30	70	6
AYCNAAQDEXZ0660	6.6	30	70	6
AYCNAAQDEXZ0670	6.7	31	70	6
AYCNAAQDEXZ0680	6.8	31	70	6
AYCNAAQDEXZ0690	6.9	31	70	6
AYCNAAQDEXZ0700	7	32	70	6
AYCNAAQDEXZ0710	7.1	33	70	6
AYCNAAQDEXZ0720	7.2	33	70	6
AYCNAAQDEXZ0730	7.3	33	70	6
AYCNAAQDEXZ0740	7.4	33	70	6
AYCNAAQDEXZ0750	7.5	33	70	6
AYCNAAQDEXZ0760	7.6	33	70	6
AYCNAAQDEXZ0770	7.7	36	70	6
AYCNAAQDEXZ0780	7.8	36	70	6
AYCNAAQDEXZ0790	7.9	36	70	6

8~9.9

37~45

70~80

4.46~4.64

Expand this group (20 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ0800	8	37	70	8
AYCNAAQDEXZ0810	8.1	37	80	8
AYCNAAQDEXZ0820	8.2	37	80	8
AYCNAAQDEXZ0830	8.3	37	80	8
AYCNAAQDEXZ0840	8.4	39	80	8
AYCNAAQDEXZ0850	8.5	39	80	8
AYCNAAQDEXZ0860	8.6	39	80	8
AYCNAAQDEXZ0870	8.7	40	80	8
AYCNAAQDEXZ0880	8.8	40	80	8
AYCNAAQDEXZ0890	8.9	40	80	8
AYCNAAQDEXZ0900	9	41	80	8
AYCNAAQDEXZ0910	9.1	42	80	8
AYCNAAQDEXZ0920	9.2	42	80	8
AYCNAAQDEXZ0930	9.3	42	80	8
AYCNAAQDEXZ0940	9.4	43	80	8
AYCNAAQDEXZ0950	9.5	43	80	8
AYCNAAQDEXZ0960	9.6	43	80	8
AYCNAAQDEXZ0970	9.7	45	80	8
AYCNAAQDEXZ0980	9.8	45	80	8
AYCNAAQDEXZ0990	9.9	45	80	8

10~11.9

45~54

80~90

4.47~4.62

Expand this group (20 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ1000	10	45	80	10
AYCNAAQDEXZ1010	10.1	46	90	10
AYCNAAQDEXZ1020	10.2	46	90	10
AYCNAAQDEXZ1030	10.3	46	90	10
AYCNAAQDEXZ1040	10.4	48	90	10
AYCNAAQDEXZ1050	10.5	48	90	10
AYCNAAQDEXZ1060	10.6	48	90	10
AYCNAAQDEXZ1070	10.7	49	90	10
AYCNAAQDEXZ1080	10.8	49	90	10
AYCNAAQDEXZ1090	10.9	49	90	10
AYCNAAQDEXZ1100	11	50	90	10
AYCNAAQDEXZ1110	11.1	51	90	10
AYCNAAQDEXZ1120	11.2	51	90	10
AYCNAAQDEXZ1130	11.3	51	90	10
AYCNAAQDEXZ1140	11.4	52	90	10
AYCNAAQDEXZ1150	11.5	52	90	10
AYCNAAQDEXZ1160	11.6	52	90	10
AYCNAAQDEXZ1170	11.7	54	90	10
AYCNAAQDEXZ1180	11.8	54	90	10
AYCNAAQDEXZ1190	11.9	54	90	10

12~13.9

54~63

90~100

4.47~4.6

Expand this group (20 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ1200	12	54	90	12
AYCNAAQDEXZ1210	12.1	55	100	12
AYCNAAQDEXZ1220	12.2	55	100	12
AYCNAAQDEXZ1230	12.3	55	100	12
AYCNAAQDEXZ1240	12.4	57	100	12
AYCNAAQDEXZ1250	12.5	57	100	12
AYCNAAQDEXZ1260	12.6	57	100	12
AYCNAAQDEXZ1270	12.7	58	100	12
AYCNAAQDEXZ1280	12.8	58	100	12
AYCNAAQDEXZ1290	12.9	58	100	12
AYCNAAQDEXZ1300	13	59	100	12
AYCNAAQDEXZ1310	13.1	60	100	12
AYCNAAQDEXZ1320	13.2	60	100	12
AYCNAAQDEXZ1330	13.3	60	100	12
AYCNAAQDEXZ1340	13.4	61	100	12
AYCNAAQDEXZ1350	13.5	61	100	12
AYCNAAQDEXZ1360	13.6	61	100	12
AYCNAAQDEXZ1370	13.7	63	100	12
AYCNAAQDEXZ1380	13.8	63	100	12
AYCNAAQDEXZ1390	13.9	63	100	12

14~15.9

63~72

100~115

4.48~4.59

Expand this group (20 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ1400	14	63	100	12
AYCNAAQDEXZ1410	14.1	64	105	12
AYCNAAQDEXZ1420	14.2	64	105	12
AYCNAAQDEXZ1430	14.3	64	105	12
AYCNAAQDEXZ1440	14.4	66	105	12
AYCNAAQDEXZ1450	14.5	66	105	12
AYCNAAQDEXZ1460	14.6	66	105	12
AYCNAAQDEXZ1470	14.7	67	105	12
AYCNAAQDEXZ1480	14.8	67	105	12
AYCNAAQDEXZ1490	14.9	67	105	12
AYCNAAQDEXZ1500	15	68	105	12
AYCNAAQDEXZ1510	15.1	69	115	12
AYCNAAQDEXZ1520	15.2	69	115	12
AYCNAAQDEXZ1530	15.3	69	115	12
AYCNAAQDEXZ1540	15.4	70	115	12
AYCNAAQDEXZ1550	15.5	70	115	12
AYCNAAQDEXZ1560	15.6	70	115	12
AYCNAAQDEXZ1570	15.7	72	115	12
AYCNAAQDEXZ1580	15.8	72	115	12
AYCNAAQDEXZ1590	15.9	72	115	12

16~17.5

72~79

115~125

4.5~4.55

Expand this group (4 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ1600	16	72	115	16
AYCNAAQDEXZ1650	16.5	75	115	16
AYCNAAQDEXZ1700	17	77	125	16
AYCNAAQDEXZ1750	17.5	79	125	16

18~20

81~90

125~145

16~20

4.5~4.54

Expand this group (5 specs)

Part No.	Dia.	Flute length	Overall length	Shank dia.
AYCNAAQDEXZ1800	18	81	125	16
AYCNAAQDEXZ1850	18.5	84	135	16
AYCNAAQDEXZ1900	19	86	135	16
AYCNAAQDEXZ1950	19.5	88	145	16
AYCNAAQDEXZ2000	20	90	145	20

Specification Range

Diameter	0.2~20mm
Flute length	0.66~90mm
Overall length	47~145mm
Shank diameter	3~20mm
Depth ratio	3.18~5.24

Product Description

NACHI 9610 AQDEXZ is a solid carbide flat-bottom drill that leaves a flat hole bottom. It is the only carbide drill in this catalogue - everything else is high speed steel; the flat geometry lets it start on inclined and curved faces without walking. It is made from solid carbide with an AQ coating for wear resistance and built-up edge control. Sizes cover diameter 0.2~20mm, flute length 0.66~90mm, overall length 47~145mm, shank diameter 3~20mm, 175 in total, made in Japan. Why can it start on a slope? The flat point brings both cutting edges into contact at once, so it does not slide toward the low side as a pointed drill would. It suits carbon and alloy steel, stainless steel, cast iron with workpiece hardness up to HRC50. Typical uses: drilling on inclined and curved surfaces, flat-bottomed counterbores, cross holes and thin walls. There is no second carbide drill in this family - everything else here is high speed steel; where HRC45 is enough and HSS toughness is preferred, the SG series 7572P SGESS and 7574 SGESR are both rated to HRC45. This one's HRC50 is the highest in the catalogue.

Workpiece Materials & Hardness

Steel (P)
Stainless steel (M)
Cast iron (K)

Max. workpiece hardness HRC50

Related Resources

Can't find the size you need? Use the spec quick filter to search by category.

Solid Carbide Flat Bottom Drill 9610 AQDEXZ

Specifications (175 items)

Specification Range

Product Description

Workpiece Materials & Hardness

Tags

Related Resources